DanaPneu R03 – wear resistant in dry air

DanaPneu R03 made of wear resistant UHMWPE is highly wear resistant even when running in dry air. Typically, several times longer service than when using advanced PTFE seals. DanaPneu R03 is available in standard UHMWPE DanaFlon 91 and the new temperature resistant UHMWPE DanaFlon 98.
For very high temperatures P04 is available in PTFE compounds like DanaFlon 16

Product details
Technical details
Extreme chemical resistance
Add Your Tooltip Text Here

Advantages:

  • With DF91/DF98 extreme long service even in dry air.
  • Easy to mount
  • Small groove
  • Suitable for dry air
  • Suitable for clean air
  • Available also in PTFE compounds

APPLICATION EXAMPLES

  • Clean room pneumatics
  • Hospitals
  • Painting units
  • Food equipment
  • Car painting
  • Paper industry
  • Surgical equipment

Working conditions:

  • Pressure: 5 MPa
  • Temperature:
    DanaFlon 91/NBR –30 to +80 °C, short period 120 °C
    DanaFlon 98/FPM –10 to +80 °C, short period 135 °C
    PTFE compounts/FPM –10 to +200 °C
  • PTFE compounts/FPM –10 to +200 °C
  • Media: Dry clean air
  • Speed: 5 m/s
  • Seals larger than 1000 mm, please contact us for design details
Frequently used - DanaFlon Material
Frequently used Material DanaFlon
DanaFlon material
Frequently used
Alternative solution
Intensive movement
– high pressure
–60 to +60 °C
Short duration 120 °C
–60 to +60 °C
Short duration 135 °C
–200 to +260 °C
Basis material
UHMWPE
UHMWPE
PTFE
DanaFlon
91
98
16
Filler
Virgin
Virgin
Mineral & MoS2
Colour
White
White
Blue / Gray
Extreme form stability and extrusion resistance
(Yes)
(Yes)
(Yes)
Lubricating media
Yes
Yes
Yes
Extreme wear resistance
Yes
Yes
(Yes)
Wide range of media
Yes
Yes
Yes
Non-lubricating media
Yes
Yes
Yes
Food applications
Yes
Yes
No
Conforms to food regulation
FDA, EU 10/2011
FDA, 3A Dairy, EU 10/2011
No

O-rings may limit the temperature range and need to be compatible with the media.
The performance of the seal will always depend on the overall picture of the working conditions. 
Verification can only be done by testing the seal on the actual working conditions

DanaPneu R03

Technical details

Here you can see the technical details

* Recommended finish for dynamic sealing surface
  • Ra max (0.2 μm)
  • Rz max (1.25 μm)
  • Rp max (0.63 μm)
  • Tp = 50 - 70% at depth of p= 0.25 Rz
Heading #3
Serie
Bore
øB h9
øa H9
G + 0,2– 0
R max.
E diametrical clearance
O-ring
5 MPa
Cross section
R03
00
3–14.9
øB + 4.0
2
0.3
0.4
1.78
01
15–29.9
øB + 6.0
2.85
0.5
0.4
2.62
02
30–59.9
øB + 7.5
3.8
0.8
0.8
3.53
03
60–199.9
øB + 12.5
5.6
1.2
1.2
5.33
04
200–399.9
øB + 15.0
7.55
1.5
1.6
7.00
05
400–999.9
øB + 18.0
7.55
1.5
1.6
7.00
Part No. example
DanaStep for 30 mm rod

Delivery times

For special requests, please complete our Request form or call us on +45 4922 4400.

Request form
+45 4922 4400

Since the founding in 1992, Dana-Seals has strived to be the customer’s preferred go-to supplier for standard and advanced sealing solutions for hydraulic and pneumatic equipment

Head Office

Products

useful

Dana-Seals ESG-Report 2023

We Recycle Waste Materials

We support CARE Denmark

Ⓒ 2024 - All Rights Are Reserved

Engineering request form

Please fill in the form below and we would appreciate it if you attach eventual drawings of hardware or seals to clarify technical demands.