Dana Heavy Wear Rings HR802 – Rod

The Dana Heavy Wear ring is a universal guide ring for lubricated applications. Even when subjected to very high side loads, deformation of the material is extremely small. This is simply the best way to ensure that there is no metallic contact between piston and bore.


Application Examples

Working conditions:

DanaFlon Material
Guide ring  –30 to +100 °C
Basis Phenoloc Resin - Cotton Fabric
DanaFlon 802
Filler MoS2
Colour Black
Lubricating media yes
Extreme wear resistance  yes
Wide range of media (yes)
Non-lubricating media (yes)

The performance of the wear ring will always depend on the overall picture of the working conditions. Verification can only be done by testing the wear ring in the actual working conditions.

Dana Heavy Wear Rings HR802 – Rod

Technical details

Here you can see the technical details

Serial Rod Diameter Groove Diamter Groove Ring øDG H9
øB øA H7 Width Thickness
G + 0,2- 0 W
HR250-056 20 - 50 øB + 5 5,6 2,5 øB + 1,6
HR250-097 30 - 140 øB + 5 9,7 2,5 øB + 1,6
HR250-150 50 - 300 øB + 5 15,0 2,5 øB + 1,6
HR250-250 100 - 300 øB + 5 25,0 2,5 øB + 1,6
Order example - DanaHeavy wear ring for 90 mm rod
Straight Cut 90° - Code 3

Delivery times

For special requests, please complete our Request form or call us on +45 4922 4400.

Engineering request form

Please fill in the form below and we would appreciate it if you attach eventual drawings of hardware or seals to clarify technical demands.